Global Search
One query across documents (page by page), definitions, standards, questions, news, tools and training.
8 results for “Gauge block”
Grades, tolerances, and test methods for gauge blocks — the workhorse end standards of dimensional laboratories. ISO/IEC Dimensional
An end standard of length with flat, parallel measuring faces of known separation, wrung into stacks to realize lengths — grades and requirements per ISO…
A device reproducing or supplying, in a permanent manner during its use, quantities of given values — gauge blocks, standard weights, volumetric flasks, standard resistors…
…3.1.1 Dimensional measurements Both PG38 and PG39 were first dimensioned in 1989 at NIST [5] using a stack of gauge blocks, a…
…8250 Reference, Option C, Use of Tuning Fork Gauge and NIST -transmitted Radio Signal. The tuning fork, or other acoustic frequency emitting device, must…
…The examples span the bread-and-butter of a commercial lab — weights, gauge blocks, thermometers, multimeters, torque — each carried from measurement model to reported…
…adjustment rules) apply to click wrenches exactly as they do to gauge blocks. The community Q&A thread on torque intervals walks a worked…
…If your 100 mm gauge block needs 0.1 µm and the scope line says 0.5 µm, that lab cannot serve that need…
Questions post under a public pseudonym. Be specific — instrument, method, standard.