Standards Index

AIAG MSA-4:2010 Measurement Systems Analysis (MSA) Reference Manual, Fourth Edition AIAG Current ANSI/NCSL Z540.3-2006 (R2013) Requirements for the Calibration of Measuring and Test Equipment ANSI/NCSLI Current ASME B89.7.3.1-2001 Guidelines for Decision Rules: Considering Measurement Uncertainty in Determining Conformance to Specifications ASME Current ASTM E1137/E1137M-08(2020) Standard Specification for Industrial Platinum Resistance Thermometers ASTM Current ASTM E617-23 Standard Specification for Laboratory Weights and Precision Mass Standards ASTM Current ASTM E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments ASTM Current BIPM SI Brochure, 9th edition (2019) The International System of Units (SI) JCGM/BIPM Current DKD-R 6-1 (Rev. 3, 2020) Calibration of Pressure Gauges DKD Current EA-4/02 M:2022 Evaluation of the Uncertainty of Measurement in Calibration EA Current EURAMET cg-15 v3.0 (2015) Guidelines on the Calibration of Digital Multimeters EURAMET Current EURAMET cg-17 v4.1 (2022) Guidelines on the Calibration of Electromechanical and Mechanical Manometers EURAMET Current EURAMET cg-18 v4.0 (2015) Guidelines on the Calibration of Non-Automatic Weighing Instruments EURAMET Current EURAMET cg-8 v3.1 (2020) Guidelines on the Calibration of Thermocouples EURAMET Current Eurachem/CITAC QUAM:2012 Quantifying Uncertainty in Analytical Measurement (Guide CG 4, 3rd edition) EURACHEM/CITAC Current IEC 60584-1:2013 Thermocouples — Part 1: EMF specifications and tolerances ISO/IEC Current IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors ISO/IEC Current ILAC-G24:2022 Guidelines for the determination of recalibration intervals of measuring equipment ILAC Current ILAC-G8:09/2019 Guidelines on Decision Rules and Statements of Conformity ILAC Current ILAC-P10:07/2020 ILAC Policy on Metrological Traceability of Measurement Results ILAC Current ILAC-P14:09/2020 ILAC Policy for Measurement Uncertainty in Calibration ILAC Current ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment ISO/IEC Current ISO 10360-1:2000 GPS — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary ISO/IEC Current ISO 10360-2:2009 GPS — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring linear dimensions ISO/IEC Current ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison ISO/IEC Current ISO 14253-1:2017 GPS — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications ISO/IEC Current ISO 15530-3:2011 GPS — CMM technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards ISO/IEC Current ISO 16063-21:2003 Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer ISO/IEC Current ISO 17034:2016 General requirements for the competence of reference material producers ISO/IEC Current ISO 1:2022 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties ISO/IEC Current ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation ISO/IEC Current ISO 3650:1998 Geometrical Product Specifications (GPS) — Length standards — Gauge blocks ISO/IEC Current ISO 376:2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines ISO/IEC Current ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use ISO/IEC Current ISO 5167-1:2022 Measurement of fluid flow by means of pressure differential devices — Part 1: General principles and requirements ISO/IEC Current ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions ISO/IEC Current ISO 5725-2:2025 Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility ISO/IEC Current ISO 6508-2:2023 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters ISO/IEC Current ISO 6789-1:2017 Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing ISO/IEC Current ISO 6789-2:2017 Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty ISO/IEC Current ISO 7500-1:2018 Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines ISO/IEC Current ISO 80000-1:2022 Quantities and units — Part 1: General ISO/IEC Current ISO 8655-1:2022 Piston-operated volumetric apparatus — Part 1: Terminology, general requirements and user recommendations ISO/IEC Current ISO 8655-6:2022 Piston-operated volumetric apparatus — Part 6: Gravimetric reference measurement procedure for the determination of volume ISO/IEC Current ISO 9001:2015 Quality management systems — Requirements ISO/IEC Current ISO/IEC 17011:2017 Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies ISO/IEC Current ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories ISO/IEC Current ISO/IEC 17043:2023 Conformity assessment — General requirements for the competence of proficiency testing providers ISO/IEC Current ITS-90 (1990) The International Temperature Scale of 1990 JCGM/BIPM Current JCGM 100:2008 (GUM) Evaluation of measurement data — Guide to the expression of uncertainty in measurement JCGM/BIPM Current JCGM 101:2008 Evaluation of measurement data — Supplement 1 to the GUM — Propagation of distributions using a Monte Carlo method JCGM/BIPM Current JCGM 102:2011 Evaluation of measurement data — Supplement 2 to the GUM — Extension to any number of output quantities JCGM/BIPM Current JCGM 106:2012 Evaluation of measurement data — The role of measurement uncertainty in conformity assessment JCGM/BIPM Current JCGM 200:2012 (VIM3) International vocabulary of metrology — Basic and general concepts and associated terms (VIM), 3rd edition JCGM/BIPM Current JCGM GUM-1:2023 Guide to the expression of uncertainty in measurement — Part 1: Introduction JCGM/BIPM Current JCGM GUM-6:2020 Guide to the expression of uncertainty in measurement — Part 6: Developing and using measurement models JCGM/BIPM Current NCSLI RP-1 (2010) Establishment and Adjustment of Calibration Intervals ANSI/NCSLI Current NIST GLP 1 (2019) Quality Assurance of Laboratory Measurement Results NIST Current NIST GLP 10 (2019) Purity of Water NIST Current NIST GLP 11 (2019) Painting Weights NIST Current NIST GLP 13 (2019) Drying "To Contain" Volume Standards NIST Current NIST GLP 14 (2019) Method Validation NIST Current NIST GLP 15 (2019) Procedure for Software QA NIST Current NIST GLP 3 (1986) Care of State Standards NIST Current NIST GLP 4 (2019) Periodic Recalibration of State Standards NIST Current NIST GLP 6 (1986) Prerequisites for Testing Measurement Standards and Equipments NIST Current NIST GLP 8 (1986) Sealing of Equipment NIST Current NIST GLP 9 (2019) Rounding Expanded Uncertainties and Calibration Values NIST Current NIST GMP 1 (2019) Reading Turning Points on an Equal Arm Balance NIST Current NIST GMP 10 (2019) Understanding Factors Affecting Weighing Operations NIST Current NIST GMP 11 (2019) Assignment and Adjustment of Calibration Intervals for Laboratory Standards NIST Current NIST GMP 12 (2019) Standard Operating Procedure Selections NIST Current NIST GMP 13 (2019) Ensuring Traceability NIST Current NIST GMP 2 (2014) Reading the Center of Graduations When Using a Microscope NIST Current NIST GMP 3 (2019) Method of Reading A Meniscus Using Water or Other Wetting Liquid NIST Current NIST GMP 4 (1986) Adjusting the Optical Scale on a Single Pan Mechanical Balance NIST Current NIST GMP 5 (1986) Weight Cleaning Procedures NIST Current NIST GMP 6 (2019) Cleaning Metal Volumetric Measures NIST Current NIST GMP 7 (2019) Cleaning Precision Glassware NIST Current NIST GMP 8 (2014) Recommended Form of Reporting Tape Calibrations NIST Current NIST GMP 9 (2014) Equations for Metallic Tapes NIST Current NIST Handbook 143:2019 State Weights and Measures Laboratories Program Handbook NIST Current NIST Handbook 44 (2025) Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices NIST Current NIST IR 6969:2019 Selected Laboratory and Measurement Practices and Procedures to Support Basic Mass Calibrations (SOP series) NIST Current NIST SOP 1 (2019) Preparation of Calibration Certificates NIST Current NIST SOP 10 (2014) Calibration of Rigid Rules NIST Current NIST SOP 11 (2014) Calibration of Metal Tapes, Bench Method NIST Current NIST SOP 12 (2014) Calibration of Steel Tapes, Tape-to-Tape Method NIST Current NIST SOP 13 (2006) Calibration of Volumetric Ware, Gravimetric Method NIST Current NIST SOP 14 (2019) Gravimetric Calibration of Volumetric Ware Using an Electronic Balance NIST Current NIST SOP 15 (2006) Calibration of Intermediate and Large Volume Standards Gravimetric Method Using an Equal-Arm Balance NIST Current NIST SOP 16 (2019) Calibration of Measuring Flasks, Volume Transfer Method NIST Current NIST SOP 17 (2019) Control Charts of Laboratory Owned Check Standards NIST Current NIST SOP 18 (2019) Calibration of Graduated Neck-Type Metal Volumetric Field Standards, Volumetric Transfer Method NIST Current NIST SOP 19 (2019) Calibration of Large Neck-Type Metal Provers, Volume Transfer Method NIST Current NIST SOP 2 (2019) Applying Air Buoyancy Corrections NIST Current NIST SOP 20 (2019) Standard Deviation and Range Charts NIST Current NIST SOP 21 (2019) Calibration of LPG Provers NIST Current NIST SOP 22 (2019) Calibration of Traffic Speed Guns and Tuning Forks NIST Current NIST SOP 23 (2014) Calibrations of PI Tapes Bench Method NIST Current NIST SOP 24 (2019) Calibration of Field Standard Stopwatches NIST Current NIST SOP 26 (2019) Gravimetric Calibration of Dynamic Volumetric Systems used as Standards NIST Current NIST SOP 27 (2019) Calibration of Railroad Test Cars (Mass) NIST Current NIST SOP 28 (2019) Using Advanced Weighing Designs NIST Current NIST SOP 29 (2019) Assignment of Uncertainty NIST Current NIST SOP 3 (1986) Weighing by Double Substitution Using an Equal-Arm Balance NIST Current NIST SOP 30 (2019) Process Measurement Assurance Program NIST Current NIST SOP 31 (2019) Scale Plate Calibration for Volumetric Field Standards NIST Current NIST SOP 33 (2019) Calibration of Weights Carts NIST Current NIST SOP 34 (2019) Selection and Use of Sensitivity Weights and Tare Weights in Weighing Procedures NIST Current NIST SOP 4 (2019) Weighing by Double Substitution NIST Current NIST SOP 49 (2019) Calibration of Environmental Monitoring Standards by Direct Comparison NIST Current NIST SOP 5 (2019) Using a 3-1 Weighing Design NIST Current NIST SOP 52 (2019) Verification and Adjustment of Digital Conductivity Meter and Measuring Water Conductivity NIST Current NIST SOP 6 (1986) Weighing By Transposition NIST Current NIST SOP 7 (2019) Weighing by Single Substitution Using a Single Pan Mechanical Balance, a Full Electronic Balance, or a Balance with Digital Indications and Built in Weights NIST Current NIST SOP 8 (2019) Medium Accuracy Calibrations of Mass Standards by Modified Substitution NIST Current NIST SOP 9 (2019) Control Charts for Calibration of Mass Standards NIST Current NIST SP 250 (1998) NIST Calibration Services Users Guide NIST Current NIST SP 250-1 (1987) Spectral Radiance Calibrations NIST Current NIST SP 250-10 (1987) Radioactivity Calibrations with the 4-pi Gamma Ionization Chamber NIST Current NIST SP 250-100 (2022) Magnetic Resonance Imaging Biomarker Calibration Service: NMR Measurement of Isotropic Water Diffusion Coefficient NIST Current NIST SP 250-101 (2024) Ultraviolet to Short-Wave Infrared Spectral Reflectance NIST Current NIST SP 250-1039r1 (2013) Liquid Flow Meter Calibrations with the 0.1 L/s and the 2.5 L/s Piston Provers NIST Current NIST SP 250-1046 (2009) Gas Flowmeter Calibrations With the 26 m3 PVTt Standard NIST Current NIST SP 250-11 (1988) Dosimetry for High Dose Applications NIST Current NIST SP 250-12 (1987) Neutron Personnel Dosimetry NIST Current NIST SP 250-13 (1988) Activation Foil Irradiation with Californium Fission Sources NIST Current NIST SP 250-14 (1988) Activation Foil Irradiation by Reactor Cavity Fission Sources NIST Current NIST SP 250-18 (1988) Neutron Source Strength Calibrations NIST Current NIST SP 250-19 (1988) Calibration of Gamma-Ray-Emitting Brachytherapy Sources NIST Current NIST SP 250-2 (1987) Far Ultraviolet Detector Standards NIST Current NIST SP 250-21 (1988) Calibration of Beta-Particle Radiation Instrumentation and Sources NIST Current NIST SP 250-22 (1987) Platinum Resistance Thermometer Calibrations NIST Current NIST SP 250-23 (1988) Liquid-in-Glass Thermometer Calibration Service NIST Current NIST SP 250-24 (1987) Standard Cell Calibrations NIST Current NIST SP 250-26 (1988) Phase Angle Calibration Services NIST Current NIST SP 250-27 (1989) AC-DC Difference Calibrations NIST Current NIST SP 250-28 (1988) Solid-State DC Voltage Standard Calibrations NIST Current NIST SP 250-29 (2004) Remote Frequency Calibrations: The NIST Frequency Measurement and Analysis Service NIST Current NIST SP 250-3 (1987) Radiometric Standards in the Vacuum Ultraviolet NIST Current NIST SP 250-31 (1989) Mass Calibrations NIST Current NIST SP 250-32 (1988) A Calibration Service for 30 MHz Attenuation and Phase Shift NIST Current NIST SP 250-33 (1988) A Calibration Service for Voltage Transformers and High-Voltage Capacitors NIST Current NIST SP 250-34 (1989) High Vacuum Standard and Its Use NIST Current NIST SP 250-35 (1989) The Calibration of Thermocouples and Thermocouple Materials NIST Current NIST SP 250-36 (1991) A Calibration Service for Current Transformers NIST Current NIST SP 250-38 (1992) NIST Leak Calibration Service NIST Current NIST SP 250-39 (2009) NIST Calibration Services for Pressure Using Piston Gauge Standards NIST Current NIST SP 250-4 (1987) Fricke Dosimetry in High-Energy Electron Beams NIST Current NIST SP 250-41 (2008) Spectroradiometric Detector Measurements: Ultraviolet, Visible, and Near-Infrared Detectors for Spectral Power NIST Current NIST SP 250-42 (1998) Spectroradiometric Detector Measurements: Part III — Infrared Detectors NIST Current NIST SP 250-43 (1998) Radiance Temperature Calibrations NIST Current NIST SP 250-44 (1998) Radiation Processing Dosimetry Calibration Services and Measurement Assurance Program NIST Current NIST SP 250-45 (1998) Radiation Processing Dosimetry Calibration Services: Manual of Calibration Procedures NIST Current NIST SP 250-46 (1998) NIST Multifunction Calibration System NIST Current NIST SP 250-47 (1998) NIST Calibration Service for Capacitance Standards at Low Frequencies NIST Current NIST SP 250-48 (1998) Spectral Reflectance NIST Current NIST SP 250-49 (1998) NIST Calibration Services for Gas Flow Meters: Piston Prover and Bell Prover Gas Flow Facilities NIST Current NIST SP 250-51 (1999) Calibration Service of Optoelectronic Frequency Response at 1319 nm NIST Current NIST SP 250-52 (2000) Error Analysis and Calibration Uncertainty of Capacitance Standards at NIST NIST Current NIST SP 250-53 (1999) Calibration Service for Spectral Responsivity of Laser and Optical-Fiber Power Meters NIST Current NIST SP 250-54 (2000) Optical Fiber Power Meter Calibrations at NIST NIST Current NIST SP 250-56 (2000) Optical Fiber Power Meter Nonlinearity Calibrations at NIST NIST Current NIST SP 250-57 (2000) Measurement Assurance Program for the Spectral Density of Relative Intensity Noise of Optical Fiber Sources Near 1550 nm NIST Current NIST SP 250-58 (2001) Calibration of X-Ray and Gamma-Ray Measuring Instruments NIST Current NIST SP 250-59 (2002) NIST Computer Time Services: Internet Time Service (ITS), Automated Computer Time Service (ACTS), and time.gov Web Sites NIST Current NIST SP 250-5a (2004) Alpha-Particle Calibrations NIST Current NIST SP 250-6 (1987) Regular Spectral Transmittance NIST Current NIST SP 250-60 (2003) Measurement Assurance Program for Wavelength Dependence of Polarization Dependent Loss of Fiberoptic Devices NIST Current NIST SP 250-61 (2004) Operation and Reference Manual for the NIST Automated AC-DC Calibration Systems and Software NIST Current NIST SP 250-62 (2003) High-Accuracy Laser Power and Energy Meter Calibration Service NIST Current NIST SP 250-63 (2004) Gas Flowmeter Calibrations with the 34 L and 677 L PVTt Standards NIST Current NIST SP 250-64 (2004) Calibration Service for Low-Level Pulsed-Laser Radiometers at 1.06 um NIST Current NIST SP 250-65 (2004) Heat-Flux Sensor Calibration NIST Current NIST SP 250-67 (2005) NIST Time and Frequency Radio Stations: WWV, WWVH, and WWVB NIST Current NIST SP 250-69 (2011) Regular Spectral Transmittance NIST Current NIST SP 250-70 (2006) Specular Gloss NIST Current NIST SP 250-71 (2008) 0:45 Surface Color NIST Current NIST SP 250-72 (2006) NIST Calibration Services for Liquid Volume NIST Current NIST SP 250-73 (2006) NIST Calibration Services for Water Flowmeters: Water Flow Calibration Facility NIST Current NIST SP 250-74 (2006) Absorbed Dose to Water Calibration of Ionization Chambers in a Co-60 Gamma-Ray Beam NIST Current NIST SP 250-75 (2007) cw Laser Power and Energy Calibrations at NIST NIST Current NIST SP 250-76 (2007) Three-Terminal Precision Standard Capacitor Calibrations at NIST NIST Current NIST SP 250-77 (2008) High Power Laser Calibrations at NIST NIST Current NIST SP 250-78r1 (2018) NIST Calibration Services for Hydrometers NIST Current NIST SP 250-79 (2007) Airspeed Calibration Service NIST Current NIST SP 250-80 (2009) Gas Flowmeter Calibrations with the Working Gas Flow Standard NIST Current NIST SP 250-81 (2008) Standard Platinum Resistance Thermometer Calibrations from the Ar TP to the Ag FP NIST Current NIST SP 250-83r1 (2021) Calibration of Hygrometers with the Hybrid Humidity Generator NIST Current NIST SP 250-87 (2010) Calibration Service for Instruments That Measure Laser Beam Diameter NIST Current NIST SP 250-89 (2011) Spectral Irradiance Calibrations NIST Current NIST SP 250-9 (1987) Calibration of Beta-Particle-Emitting Ophthalmic Applicators NIST Current NIST SP 250-90 (2012) Calibration Uncertainty for the NIST PM/AM Noise Standards NIST Current NIST SP 250-91 (2015) Calibration of Cryogenic Resistance Thermometers between 0.65 K and 165 K on the ITS-90 NIST Current NIST SP 250-93 (2015) NIST Calibration Services for Spinning Rotor Gauge Calibrations NIST Current NIST SP 250-94 (2015) Infrared Optical Properties of Materials NIST Current NIST SP 250-95 (2018) NIST Measurement Services: Photometric Calibrations NIST Current NIST SP 250-96 (2017) Dimensional Measurement of Nanostructures with Scanning Electron Microscopy NIST Current NIST SP 250-97 (2018) Magnetic Resonance Imaging Biomarker Calibration Service: Proton Spin Relaxation Times NIST Current NIST SP 250-98 (2021) Liquid Flow Meter Calibrations with the 15 kg/s Water Flow Standard NIST Current NIST SP 250-99 (2022) Diffuse Visual Transmission Density NIST Current NIST SP 330:2019 The International System of Units (SI) NIST Current NIST SP 811:2008 Guide for the Use of the International System of Units (SI) NIST Current NIST TN 1297 (1994) Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results NIST Current OIML D 8:2004 Measurement standards — Choice, recognition, use, conservation and documentation OIML Current OIML R 111-1:2004 Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3 — Part 1: Metrological and technical requirements OIML Current OIML R 76-1:2006 Non-automatic weighing instruments — Part 1: Metrological and technical requirements — Tests OIML Current