SOPs & Documents

GLP 1 — QA Lab Measurement Results GLP 1 – 2019 Page 1 of 8 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 201 9 GLP 1 Good Laboratory Practice for the Quality Assurance of Laboratory Measurement Results 1 Quality assurance of labor... GLP 8 pages May 2019 GLP 3 — Care of State Standards GLP 1 pages 1986 GLP 4 — Recalibration State Standards GLP 4 – 2019 Page 1 of 3 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 201 9 GLP 4 Good Laboratory Practice for Periodic Recalibration of State Standards 1 Purpose Many States have provisions in t... GLP 3 pages May 2019 GLP 6 — Prerequisites for Testing Measurement Standards and Equipments GLP 2 pages 1986 GLP 8 — Sealing of Equipment GLP 2 pages 1986 GLP 9 — Rounding GLP 9 – 2019 Page 1 of 4 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 201 9 GLP 9 Good Laboratory Practice for Rounding Expanded Uncertainties and Calibration Values A calibration is not complete... GLP 4 pages May 2019 GLP 10 — Purity Water GLP 10 – 2019 Page 1 of 6 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 GLP 10 Good Laboratory Practice for the Purity of Water 1 Water for volume calibrations. Water is used in two ways in t... GLP 6 pages May 2019 GLP 11 — Painting Cast Iron Weights GLP 11 – 2019 Page 1 of 1 This publication is availab le free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 201 9 GLP 11 Good Laboratory Practice for Painting Cast Iron Weights Large cast iron or steel weights should be painted bot... GLP 2 pages May 2019 GLP 13 — Drying Tc Volume Standards GLP 13 – 2019 Page 1 of 2 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 GLP 13 Good Laboratory Practice for Drying “To Contain” Volume Standards 1 Purpose for drying Vessels calibrated "To Co... GLP 2 pages May 2019 GLP 14 — Procedure for Method Validation GLP 14 – 2019 Page 1 of 9 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR. 8250 GLP 14 Good Laboratory Practice for Procedure for Method Validation 1 Introduction This is the metrology laboratory policy an... GLP 10 pages May 2019 GLP 15 — Procedure for Software QA GLP 15 – 2019 Page 1 of 11 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.8250 GLP 15 Good Laboratory Practice for Software Quality Assurance 1 Introduction This is the metrology laboratory procedure for... GLP 12 pages May 2019 GMP 1 — Reading Turning Points GMP 1 – 2019 Page 1 of 2 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 201 9 GMP 1 Good Measurement Practice for Reading Turning Points on an Equal -Arm Balance The damping of the beam oscillation... GMP 2 pages May 2019 GMP 2 — Reading the Center of Graduations When Using a Microscope October 2014 GMP 2 Page 1 of 2 GMP 2 Good Measurement Practice for Reading the Center of Graduations when using a Microscope 1. The microscope furnished to State laboratories with the length bench has a reticle on which each graduation repr... GMP 2 pages 2014 GMP 3 — Reading Meniscus GMP 3 – 2019 Page 1 of 7 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 GMP 3 Good Measurement Practice for Method of Reading a Meniscus Using Water or Other Wetting Liquid 1 Meniscus Reading... GMP 8 pages May 2019 GMP 4 — Adjusting the Optical Scale on a Single Pan Mechanical Balance GMP 1 pages 1986 GMP 5 — Weight Cleaning Procedures GMP 6 pages 1986 GMP 6 — Cleaning Metal Volume Measures GMP 6 – 2019 Page 1 of 2 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR.7383 - 2019 GMP 6 Good Measurement Practice for Cleaning Metal Volumetric Measures 1 Cleanliness requirements All volumetric test m... GMP 2 pages May 2019 GMP 7 — Cleaning Precision Glassware GMP 7 – 2019 Page 1 of 3 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 GMP 7 Good Measurement Practice for Cleaning Precision Glassware 1 Cleanliness requirements The volume contained in or d... GMP 4 pages May 2019 GMP 8 — Recommended Form of Reporting Tape Calibrations October 2014 GMP 8 Page 1 of 4 GMP 8 Good Measurement Practice for Reporting Tape Calibrations Tape calibration results should be reported as described in SOP 1, Preparation of Calibration Certificates. The use of the Calibration Certificat... GMP 4 pages 2014 GMP 9 — Equations for Metallic Tapes October 2014 GMP 9 Page 1 of 2 GMP 9 Good Measurement Practice for Equations for Metallic Tapes Table 1. Symbols used in this practice. Symbol Description L Horizontal straight-line distance LS Calibrated length of the tape interval on a fl... GMP 2 pages 2014 GMP 10 — Weighing Operation Factors GMP 10 – 2019 Page 1 of 6 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 201 9 GMP 10 Good Measurement Practice for Understanding Factors Affecting Weighing Operations Good laboratory techniques an... GMP 6 pages May 2019 GMP 11 — Calibration Intervals GMP 11 – 2019 Page 1 of 9 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 201 9 GMP 11 Good Measurement Practice for Assignment and Adjustment of Calibration Intervals for Laboratory Standards 1 Int... GMP 10 pages May 2019 GMP 12 — Selecting Sops GMP 12 – 2019 Page 1 of 4 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 201 9 GMP 12 Good Measurement Practice for Standard Operating Procedure Selection Good laboratory practices, use of proper... GMP 4 pages May 2019 GMP 13 — Ensuring Traceability GMP 13 – 2019 Page 1 of 17 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 2019 GMP 13 Good Measurement Practice for Ensuring Metrological Traceability 1 1 Introduction Purpose The purpose of this G... GMP 17 pages Jun 2019 SOP 1 — Calibration Certificate Eval App B C SOP 1 – 2019 (Appendices B and C) Appendix B - Calibration Certificate Review Checklist ISO/IEC 17025:2017, Section 7.8 - Reporting of Results This evaluation form may be used as an assessment tool for calibration certificates. Its use need... SOP 2 pages May 2019 SOP 1 — Calibration Certificate Preparation SOP 1 – 2019 Page 1 of 9 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 201 9 SOP 1 Recommended Standard Operating Procedure for Calibration Certificate Preparation 1 Introduction Calibration cer... SOP 9 pages May 2019 SOP 1 — Calibration Certificate Sample App a SOP 1 – 2019 Page 6 of 9 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 201 9 Appendix A – Example Certificate COMPLIANT CALIBRATION LABORATORY 123 Some Ave. City, State Mail code XYZ Accreditati... SOP 2 pages May 2019 SOP 2 — Applying Air Buoyancy SOP 2 – 2019 Page 1 of 19 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 2019 SOP 2 Recommended Standard Operating Procedure for Applying Air Buoyancy Corrections 1 Introduction Purpose If uncorr... SOP 19 pages May 2019 SOP 3 — Weighing by Double Substitution Using an Equal Arm Balance SOP No. 3 Recommended Standard Operations Procedure for Weighing by Double Substitution Using an Equal-Arm Balance I. Introduc tion I. i . Purpose The double substitution procedure is one in which a standard and an unknown weight are interc... SOP 10 pages 1986 SOP 4 — Double Substitution SOP 4 – 2019 Page 1 of 18 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 2019 SOP 4 Recommended Standard Operating Procedure for Weighing by Double Substitution 1 Introduction Purpose The double su... SOP 18 pages May 2019 SOP 5 — 3 1 Weighing Design SOP 5 – 2019 Page 1 of 18 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.5672 - 2019 SOP 5 Recommended Standard Operating Procedure for Using a 3- 1 Weighing Design 1 Introduction Purpose The 3-1 weighing... SOP 18 pages May 2019 SOP 6 — Weighing by Transposition SOP No. 6 Recommended Standard Operations Procedure for Weighing by Transposition 1. Introduction 1.1. Purpose This method eliminates possible. error in comparison of weights when using an equal-arm balance, due to a small inequality in the... SOP 10 pages 1986 SOP 7 — Single Substitution SOP 7 – 2019 Page 1 of 15 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 2019 SOP 7 Recommended Standard Operating Procedure for Weighing by Single Substitution Using a Single-Pan Mechanical Bala... SOP 15 pages May 2019 SOP 8 — Modified Substitution SOP 8 – 2019 Page 1 of 15 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 2019 SOP 8 Recommended Standard Operating Procedure for Medium Accuracy Calibration of Mass Standards by Modified Substituti... SOP 15 pages May 2019 SOP 9 — Control Charts for Mass SOP 9 – 2019 Page 1 of 9 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 2019 SOP 9 Recommended Standard Operating Procedure for Control Charts for Calibration of Mass Standards 1 Introduction This... SOP 9 pages May 2019 SOP 10 — Calibration of Rigid Rules October 2014 SOP 10 Page 1 of 9 SOP No. 10 Recommended Standard Operating Procedure for Calibration of Rigid Rules 1. Introduction 1.1. Purpose This SOP describes the procedure to be followed for the calibration of rigid rules by comparison... SOP 9 pages 2014 SOP 11 — Calibration of Metal Tapes Bench Method October 2014 SOP 11 Page 1 of 15 SOP No. 11 Recommended Standard Operating Procedure for Calibration of Metal Tapes Bench Method 1. Introduction 1.1. Purpose Metal tapes are used by contractors, surveyors, and others for building layouts, m... SOP 15 pages 2014 SOP 12 — Calibration of Steel Tapes Tape to Tape Method October 2014 SOP 12 Page 1 of 12 SOP No. 12 Recommended Standard Operating Procedure for Calibration of Metal Tapes 1 Tape-to-Tape Method I. Introduction 1.1. Purpose Metal tapes are used by contractors, surveyors, and others for building l... SOP 12 pages 2014 SOP 13 — Calibration of Volumetric Ware Gravimetric Method 11/15/2006 SOP 13 Page 1 of 7 SOP 13 Standard Operating Procedure for Calibration of Volumetric Ware, Gravimetric Method 1 1 Introduction 1.1 Purpose of Test Volumetric flasks, pipets, graduated cylinders, burets, and similar glass and plas... SOP 7 pages 2006 SOP 14 — Gravimetric Calibration SOP 14 – 2019 Page 1 of 20 This publication is available free of charge from: ht tps://doi.org/10.6028/NIST.IR.7383 - 2019 SOP No. 14 Recommended Standard Operating Procedure for Gravimetric Calibration of Volumetric Standards Using an Elec... SOP 20 pages May 2019 SOP 15 — Calibration of Intermediate and Large Volume Standards Gravimetric Method Using an Equal Arm Balance 11/15/2006 SOP 15 Page 1 of 8 SOP No. 15 Recommended Standard Operations Procedure for Calibration of Intermediate and Large Volume Standards Gravimetric Method 1 Using an Equal-Arm Balance 2 1 Introduction 1.1 Purpose of Calibration This p... SOP 8 pages 2006 SOP 16 — Volume Transfer Flasks SOP 16 – 2019 Page 1 of 9 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 SOP 16 Standard Operating Procedure for Calibration of Measuring Flasks Volume Transfer Method 1 Introduction Purpose o... SOP 10 pages May 2019 SOP 17 — Control Charts Check Standards SOP 17 – 2019 Page 1 of 5 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 SOP 17 Standard Operating Procedure for Control Charts of Check Standards 1 Introduction Purpose This procedure may be... SOP 6 pages May 2019 SOP 18 — Volume Transfer Field Standard Using Slicker SOP 18 – 2019 Page 1 of 11 This publ ication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 SOP 18 Standard Operating Procedure for Calibration of Graduated Neck-Type Metal Volumetric Field Standards Using a S... SOP 12 pages May 2019 SOP 19 — Volume Transfer Graduated Provers This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 -2019 SOP 19 Standard Operating Procedure for Calibration of Graduated Neck-Type Metal Provers (Volume Transfer Method) 1 1 Introduction Purpose of Test... SOP 18 pages Jul 2019 SOP 20 — Standard Deviation Charts SOP 20 – 2019 Page 1 of 5 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 SOP 20 Standard Operating Procedure for Standard Deviation and Range Charts 1 Introduction Purpose This procedure descr... SOP 6 pages May 2019 SOP 21 — Lpg Prover Calibration SOP 21 – 2019 Page 1 of 22 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR. 7383 - 2019 SOP 21 Standard Operating Procedure for Calibration of LPG Provers 1 1 Introduction Purpose This procedure is used to... SOP 22 pages May 2019 SOP 22 — Tuning Forks and Freq Inst SOP 22 – 2019 Page 1 of 10 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR. 8250 SOP 22 Standard Operating Procedure for Calibration of Traffic Speed Gun Tuning Forks and other Acoustic Frequency Emitting... SOP 10 pages May 2019 SOP 23 — Calibrations of Pi Tapes Bench Method October 2014 SOP 23 Page 1 of 11 SOP 23 Recommended Standard Operations Procedure for Calibrations of PI Tapes Bench Method 1. Introduction 1.1 Purpose PI tapes are circumferential measuring tapes that are wrapped around a circular or cylin... SOP 11 pages 2014 SOP 24 — Calibration of Stopwatches and Timing Devices SOP 24 – 2019 Page 1 of 10 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR. 8250 SOP 24 Standard Operating Procedure for Calibration of Stopwatches and Timing Devices 1 Introduction Purpose This procedure... SOP 10 pages May 2019 SOP 26 — Gravimetric Calibration of Dynamic Volumetric Systems Used As Standards SOP 26 – 2019 Page 1 of 19 This publication is a vailable free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 SOP 26 Standard Operating Procedure For Gravimetric Calibration of Dynamic Volume tric Systems used as Standards 1 1... SOP 20 pages 2019 SOP 27 — Rr Test Cars SOP 27 – 2019 Page 1 of 12 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR. 8250 SOP 27 Standard Operating Procedure for Railroad Test Cars Using a Master Track Scale 1 Introduction Purpose. This Standard... SOP 12 pages May 2019 SOP 28 — Advanced Weighing Designs SOP 28 – 2019 Page 1 of 14 This publication is available free of charge from: https://doi. org/10.6028/NIST.IR.5672 - 201 9 SOP No. 28 Recommended Standard Operating Procedure for Using Advanced Weighing Designs 1 Introduction Purpose Advan... SOP 14 pages May 2019 SOP 29 — Assignment of Uncertainty SOP 29 – 2019 Page 1 of 11 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 2019 SOP 29 Standard Operating Procedure for the Assignment of Uncertainty 1 Introduction Purpose Laboratories performing... SOP 11 pages May 2019 SOP 30 — Process Measurement Assurance SOP 30 – 2019 Page 1 of 8 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 201 9 SOP 30 Recommended Standard Operating Procedure for a Process Measurement Assurance Program 1 Introduction Purpose T... SOP 8 pages May 2019 SOP 31 — Scale Plate Calibration SOP 31 – 2019 Page 1 of 8 This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 SOP 31 Standard Operating Procedure for Scale Plate Calibration for Volumetric Field Standards 1 Introduction Purpose T... SOP 8 pages May 2019 SOP 33 — Calibration Weight Carts SOP 33 – 2019 Page 1 of 17 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR .6969 - 2019 SOP 33 Standard Operating Procedure for Calibration of Weight Carts 1 Introduction This Standard Operation Procedure... SOP 17 pages May 2019 SOP 34 — Selection Use Sensitivity Weights Tare Weights SOP 34 – 2019 Page 1 of 5 This publication is a vailable free of charge from: https://doi.org/10.6028/NIST.IR.6969 - 2019 SOP 34 Standard Operating Procedure 1 for the Selection and Use of Sensitivity Weights and Tare Weights in Weighing Pr... SOP 5 pages Jun 2019 SOP 49 — Cal Env Stds SOP 49 – 2019 Page 1 of 8 This publication is available free of charge from: https://doi.org /10.6028/NIST.IR. 8250 SOP 49 Standard Operating Procedure for Calibration of Environmental Monitoring Standards by Direct Comparison 1 Introductio... SOP 8 pages May 2019 SOP 52 — Conductivity Meter SOP 52 – 2019 Page 1 of 6 This publication is available free of charge from: http s://doi.org /10.6028/NIST.IR. XXXX This publication is available free of charge from: https://doi.org/10.6028/NIST.IR.8250 SOP 52 Standard Operating Procedure... SOP 6 pages Jun 2019