Dictionary · Instruments
Reference operating condition
An operating condition prescribed for evaluating the performance of an instrument or for comparing results — the 23 °C ± 1 °C line at the top of a datasheet.
Related terms
More from Instruments
Steady-state operating condition
An operating condition under which the relation established by calibration remains valid even though the measurand varies with time.
VIM (JCGM 200:2012) 4.8
Dead band
The maximum interval through which the value of the quantity being measured can be changed in both directions without producing a detectable change in indication — hysteresis's operational signature.
VIM (JCGM 200:2012) 4.17
Sensitivity of a measuring system
The quotient of the change in an indication and the corresponding change in the value of the quantity being measured.
VIM (JCGM 200:2012) 4.12
Datum measurement error
The measurement error of an instrument or system at a specified measured value — the error quoted at a named point rather than over the whole interval.
VIM (JCGM 200:2012) 4.27
Step response time
The duration between the instant an input quantity is subjected to an abrupt change between two specified constant values and the instant the indication settles within specified limits of its final steady value.
VIM (JCGM 200:2012) 4.23
Resolution of a displaying device
The smallest difference between displayed indications that can be meaningfully distinguished — for a digital display, one count of the least significant digit.
VIM (JCGM 200:2012) 4.15