Dictionary · Instruments
Steady-state operating condition
An operating condition under which the relation established by calibration remains valid even though the measurand varies with time.
Related terms
More from Instruments
Reference operating condition
An operating condition prescribed for evaluating the performance of an instrument or for comparing results — the 23 °C ± 1 °C line at the top of a datasheet.
VIM (JCGM 200:2012) 4.11
Variation due to an influence quantity
The difference in indication, or in the supplied quantity value of a material measure, when an influence quantity assumes two different specified values — the temperature coefficient on a datasheet is one of these.
VIM (JCGM 200:2012) 4.22
Nominal quantity value
A rounded or approximate value of a characterizing quantity of a measuring instrument that guides its appropriate use — the "100 Ω" stamped on a resistor, the "1 kg" of a weight.
VIM (JCGM 200:2012) 4.6
Sensor
The element of a measuring system directly affected by the phenomenon, body, or substance carrying the quantity being measured — the Pt resistance element in an SPRT, the seismic mass in an accelerometer.
VIM (JCGM 200:2012) 3.8
Indication interval
The set of quantity values bounded by the extreme possible indications.
VIM (JCGM 200:2012) 4.3
Range of a nominal indication interval
The absolute difference between the extreme values of a nominal indication interval — 200 V for the −100 V to +100 V setting.
VIM (JCGM 200:2012) 4.5