Dictionary · Instruments
Measuring interval
The set of values of quantities of the same kind that can be measured by a given instrument or system with specified instrumental uncertainty under defined conditions — the interval the specifications actually promise.
Related terms
More from Instruments
Discrimination threshold
The largest change in the value of the quantity being measured that causes no detectable change in the corresponding indication — stickiness quantified.
VIM (JCGM 200:2012) 4.16
Indicating measuring instrument
A measuring instrument providing an output signal carrying information about the value of the quantity being measured — voltmeters, thermometers, balances.
VIM (JCGM 200:2012) 3.3
Step response time
The duration between the instant an input quantity is subjected to an abrupt change between two specified constant values and the instant the indication settles within specified limits of its final steady value.
VIM (JCGM 200:2012) 4.23
Variation due to an influence quantity
The difference in indication, or in the supplied quantity value of a material measure, when an influence quantity assumes two different specified values — the temperature coefficient on a datasheet is one of these.
VIM (JCGM 200:2012) 4.22
Nominal quantity value
A rounded or approximate value of a characterizing quantity of a measuring instrument that guides its appropriate use — the "100 Ω" stamped on a resistor, the "1 kg" of a weight.
VIM (JCGM 200:2012) 4.6
Limiting operating condition
An extreme operating condition an instrument is required to withstand without damage and without degrading specified properties when subsequently operated under rated conditions — survival limits, not working limits.
VIM (JCGM 200:2012) 4.10