Dictionary · Instruments
Variation due to an influence quantity
The difference in indication, or in the supplied quantity value of a material measure, when an influence quantity assumes two different specified values — the temperature coefficient on a datasheet is one of these.
Related terms
More from Instruments
Instrumental drift
A continuous or incremental change of an indication over time, due neither to a change in the quantity being measured nor to a recognized influence quantity — a key input to calibration-interval decisions.
VIM (JCGM 200:2012) 4.21
Measuring system
One or more measuring instruments and often other devices, assembled and adapted to give measured values within specified intervals for quantities of specified kinds.
VIM (JCGM 200:2012) 3.2
Instrumental measurement uncertainty
The component of measurement uncertainty arising from the instrument or system in use, typically obtained from its calibration.
VIM (JCGM 200:2012) 4.24
Limiting operating condition
An extreme operating condition an instrument is required to withstand without damage and without degrading specified properties when subsequently operated under rated conditions — survival limits, not working limits.
VIM (JCGM 200:2012) 4.10
Datum measurement error
The measurement error of an instrument or system at a specified measured value — the error quoted at a named point rather than over the whole interval.
VIM (JCGM 200:2012) 4.27
Range of a nominal indication interval
The absolute difference between the extreme values of a nominal indication interval — 200 V for the −100 V to +100 V setting.
VIM (JCGM 200:2012) 4.5