Search Metrology Atlas

The set of quantity values bounded by the extreme possible indications. VIM (JCGM 200:2012) 4.3 Instruments

VIM (JCGM 200:2012) 4.3

The absolute difference between the extreme values of a nominal indication interval — 200 V for the −100 V to +100 V setting. VIM (JCGM…

VIM (JCGM 200:2012) 4.5

The indication obtained from a phenomenon, body, or substance similar to the one under investigation but for which the quantity of interest is supposed…

VIM (JCGM 200:2012) 4.2

The quantity value provided by a measuring instrument or system — the reading, before any correction. VIM (JCGM 200:2012) 4.1 Instruments

VIM (JCGM 200:2012) 4.1

The set of values, bounded by rounded or approximate extreme indications, obtainable with a particular setting of the controls and used to designate that…

VIM (JCGM 200:2012) 4.4

A measuring instrument providing an output signal carrying information about the value of the quantity being measured — voltmeters, thermometers, balances. VIM (JCGM 200:2012…

VIM (JCGM 200:2012) 3.3

…Calibration Data Pressure Setting Indication (Left scale) Unit ( ) Indication (Right scale) Unit ( ) Pressure Setting Indication (Left scale) Unit ( ) Indication (Right scale) Unit ( ) sr20i sr150d…

Page 21 · SOP 21 · May 2019 Open PDF at page 21 →

The operation that, under specified conditions, first establishes a relation between values (with uncertainties) provided by measurement standards and corresponding indications (with uncertainties), and…

VIM (JCGM 200:2012) 2.39

…If the weight indication is more than the mid-scale value, the weight is heavy by the indicated difference; if the indication is less…

Page 4 · SOP 8 · May 2019 Open PDF at page 4 →

…If the values plotted on the standard deviation or range chart fall outside of the control limits , a decrease in precision is indicated. Problems…

Page 4 · SOP 20 · May 2019 Open PDF at page 4 →