Global Search
One query across documents (page by page), definitions, standards, questions, news, tools and training.
16 results for “Adjustment of a measuring system”
Adjustment so that the system provides a null indication corresponding to a zero value of the quantity to be measured. VIM (JCGM 200:2012…
The set of operations carried out on a measuring system so that it provides prescribed indications corresponding to given quantity values. Adjustment changes the…
…A minimum of 12 replicate measurements are required to establish initial process limits and 25 to 30 points are required for reporting valid uncertainty…
…Subsequent intervals may be adjusted based on documented analysis of adequate measurement assurance data, demonstrated control through surveillance assessments, and ongoing stability as demonstrated…
…The 14th General Conference on Weights and Measures approved the addition of the siemens as a derived unit in 1971. In the case of…
…Suitable adjustment material must be available for placement in the adjusting compartments. Check list or inspection work sheet. For reasons of safety and the…
…A documented system of comparisons with each step having the essential elements of metrological traceability going back to a standard acceptable to the parties…
…Control chart run values must both be from either before adjustment or after adjustment. A minimum of 12 replicate measurements are required to establish…
…measure or prover being evaluated. A funnel to aid in transferring water from calibrated volumetric standards into the unknown prover. Calibrated volumetric standards of…
…The standard deviation of the measurement process, s p, is taken from a control chart for a check standard or from standard deviation charts…
Questions post under a public pseudonym. Be specific — instrument, method, standard.