Sensitivity of a measuring system
The quotient of the change in an indication and the corresponding change in the value of the quantity being measured. VIM (JCGM 200:2012…
Global Search
One query across documents (page by page), definitions, standards, questions, news, tools and training.
29 results for “Sensitivity of a measuring system”
The quotient of the change in an indication and the corresponding change in the value of the quantity being measured. VIM (JCGM 200:2012…
…the sensitivity weights and tare weights used in a calibration. All mass standards must have demonstrated metrological traceability to the international system of units…
…of the balance: ( ) 21 sensitivity = sw CM OO− Eqn. (6) If the sensitivity error is less than 2 % of the nominal value of a…
the standard and test weights as well as a determination of the sensitivity of the balance under the load conditions. All weighings are made…
…Based on measured results of simulated shipping conditions, the estimate has been made from the uncertainty contribution as a percentage change in a 0…
…Schematic diagram of the NIST NMR measurement system .................................................... 8 Fig. 3. (a) Nutation data for a MnCl 2 solution (T2- 9) at 20 °C…
…For NTC materials, the much higher sensitivities at lower temperatures permit the use of DC measurement systems with higher noise, (i.e. lower signal…
…Incorporate an uncorrected systematic uncertainty for the magnitude of the buoyancy correction in the uncertainty calculations according to SOP 2 if using this equation…
…Because of the success of this system, a second automated system was assembled and used for routine calibrations beginning in 1985. A third automated…
TABLE OF CONTENTS NIST Special Publication 250...........................................................................................4 Abstract...............................................................................................................................6 1 Introduction...................................................................................................................6 2 Description of Measurement Services.........................................................................8 3 Procedures for Submitting a…
Questions post under a public pseudonym. Be specific — instrument, method, standard.