Global Search
One query across documents (page by page), definitions, standards, questions, news, tools and training.
17 results for “Repeatability condition of measurement”
A condition set that includes the same procedure, operators, measuring system, operating conditions, and location, with replicates over a short period. VIM (JCGM 200…
…component of uncertainty by statistical analysis of measured values obtained under defined conditions — e.g. the standard deviation of the mean of repeated readings…
…of the weight cart, a shift test, a sensitivity test at the test load, and evaluation of the repeatability based on a minimum of…
…all measurements on the scale during the calibration. Arrest the beam, release and repeat the reading to show repeatability and evidence of correct scale…
…Replicate Measurement. Repeat the procedure described in 2.4.4. The test measure must be capable of repeating to 0.01 % of
…standard deviations obtained from mass calibrations do not reflect the process repeatability of gravimetric calibrations; therefore, process repeatability must be obtained using this procedure…
…Lack of measurement agreement may be due to prover condition, contamination, lack of cleanliness, excessive temperature changes, poor laboratory conditions, or poor field conditions…
…No specific environmental conditions are required for this procedure. However, calibrations should be conducted under normal laboratory conditions due to the general design of…
…the variability in condition of test measures submitted for calibration as well as the short -term repeatability of the measurement process but does not…
…of charge from: https://doi.org/10.6028/NIST.IR.7383 - 2019 resolution and repeatability on a 20 L or 5 gal test measure…
Questions post under a public pseudonym. Be specific — instrument, method, standard.