Search Metrology Atlas

The datum measurement error when the specified measured value is zero. VIM (JCGM 200:2012) 4.28 Instruments

VIM (JCGM 200:2012) 4.28

…Errors will result from this process due to the extended time between closing the valve and setting the zero level and other factors associated…

Page 6 · SOP 21 · May 2019 Open PDF at page 6 →

…The cart must be adjusted as close as possible to zero error. The first reading then becomes a “zero” difference when compared to the…

Page 6 · SOP 33 · May 2019 Open PDF at page 6 →

…For this purpose, each car weight shall be corrected as close to zero error and practical and certified within Class F tolerances as often…

Page 10 · SOP 27 · May 2019 Open PDF at page 10 →

…be modified to eliminate the sensitivity factor to avoid “division by zero” errors in the calculations. Sensitivity weights are selected to meet the criteria…

Page 7 · SOP 4 · May 2019 Open PDF at page 7 →

…ht tps://doi.org/10.6028/NIST.IR.7383 - 2019 Zero the balance and then place standard mass es, M S1, on the balance…

Page 11 · SOP 14 · May 2019 Open PDF at page 11 →

…Moving from left to right, the first non-zero number is considered the first significant digit. Zeros, which follow a decimal point, when there…

Page 1 · GLP 9 · May 2019 Open PDF at page 1 →

…https://doi.org/10.6028/NIST.IR.7383 -2019 reduce water retention errors. Care must be taken during wet-downs and runs to ensure…

Page 4 · SOP 19 · Jul 2019 Open PDF at page 4 →

…the file references (A) an old value, (B) a default value, (C) displays zero or (D) an error message, as desired by the user

Page 10 · GLP 15 · May 2019 Open PDF at page 10 →

…be modified to eliminate the sensitivity factor to avoid “division by zero” errors in the calculations. If a sensitivity weight will be used, select…

Page 6 · SOP 7 · May 2019 Open PDF at page 6 →